Contech Chemicals LLP

Minimum order quantity: 500 Kg

Description:

Ferrox Grout is a blend of Portland cement, Graded Fillers & Chemical additive supplied in a ready to use dry powder. The addition of a control amount of plain water produces a free flowing non shrink Grout having strength of 75Mpa which imparts controlled expansion in the plastic states whilst minimizing the water demand. The low water demand ensures high early strength .It can be used up to a minimum of 25mm & maximum of 100mm gap thickness.

Where used:

Grouting of Base Plates and Bolt Pockets Of

• Cement, Textile, Granite & Paper Plant Machinery.
• Diesel Generators & Crane
• Machine Foundation & Building Works
• Heavy Steel Structure Foundation
• Heavy Reciprocating Equipment
• Compressors, Pump Sets
• Steel Rolling Mill Beds
• Turbo generators
• Pulverising Mills

• Pre-packed material overcomes onsite batching variations
• Develops high early compressive and flexural strength without the use of chlorides.
• Free flow ensures high level of contact with load bearing area.
• Ready to use, only add water at site

Ferricon is used in providing concrete floors, which has to carry heavy loads and traffic. This load causes Impact as well as abrades the floor topping. Ferricon being ductile and malleable resist this effect. It is available in 3 grades – i.e. Ferricon Metallic Floor Hardener, Ferricon NM – Non Metallic Floor Hardener and Ferricon QTZ – Quartz based Floor Hardener.